Seat belt

Problem Possible causes/consequences and ► Solutions

engine, the red seat After starting the engine, the red seat belt warning lamp lights up for six seconds.

The seat belt warning lamp reminds the driver and front passenger to fasten their seat belts.

•► Fasten your seat belt

engine, the red seat After starting the engine, the red seat belt warning lamp lights up. In addition, a warning tone sounds for up to six seconds.

Risk of injury
The driver's seat belt is not fastened.

•► Fasten your seat belt.

The warning tone ceases.

warning lamp lights up The red seat belt warning lamp lights up after the engine starts, as soon as the driver's or the front-passenger door is closed.

Risk of injury
The driver or front passenger has not fastened their seat belt.

•► Fasten your seat belt.

The warning lamp goes out.

Risk of injury
There are objects on the front-passenger seat.

•► Remove the objects from the front-passenger seat and stow them in a secure place.

The warning lamp goes out.

warning lamp flashes The red seat belt warning lamp flashes and an intermittent audible warning sounds.

Risk of injury
The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h).

•► Fasten your seat belt.

The warning lamp goes out and the intermittent warning tone ceases.

Risk of injury
There are objects on the front-passenger seat. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h).

•► Remove the objects from the front-passenger seat and stow them in a secure place.

The warning lamp goes out and the intermittent warning tone ceases.

    See also:

    Displaying the range and current fuel consumption
    •► Press the button on the steering wheel to select the Trip menu. •► Press the button to select current fuel consumption21 and approximate range. The approximate range that ca ...

    Showing/hiding the menu
    This function is not available while the DVD's own menu is being displayed. To show: press the COMAND controller. or Select Menu while the navigation menu is shown and press to confirm. ...

    Entering a point of interest in the vicinity of the current position
    Select Current Position and press to confirm. Continue with assigning the point of interest category. ...