Instrument cluster

Selecting the unit of measurement for distance

The Display Unit Speed-/Odometer:

function allows you to choose whether certain displays appear in kilometers or miles.

The selected unit of measurement for distance applies to:

 - the digital speedometer in the Trip menu
 - the odometer and the trip odometer
 - the trip computer
 - the current consumption and the range
 - the navigation instruction in the Navi menu
 - DISTRONIC PLUS
 - ASSYST PLUS service interval display

•► Press the steering wheel to select the Settings button on the steering wheel to select the Settings menu.

•► Press the Instr. cluster submenu. button to select the Instr. cluster submenu.

•► Press the a button to confirm.

•► Press the Display Unit Speed-/Odometer function. button to select the Display Unit Speed-/Odometer function.

You will see the selected setting: km or miles.

•► Press the setting. button to save the setting.

Selecting the permanent display function

The Permanent Display: function allows you to choose whether the multifunction display always shows the outside temperature or the speed in km/h (USA) or mph (Canada).

•► Press the steering wheel to select the Settings button on the steering wheel to select the Settings menu.

•► Press the Instr. cluster submenu. button to select the Instr. cluster submenu.

•► Press the •► Press the button to select the button to confirm.

•► Press the Permanent display function. button to select the Permanent display function.

You will see the selected setting Outside Temperature or Speedometer [km/h]:.

•► Press thesetting. button to save the setting.

    See also:

    Maximum loaded vehicle weight
    The maximum weight is the sum of the curb weight of the vehicle, the weight of the accessories, the total load limit and the weight of the optional equipment installed at the factory. ...

    System self-test
    The 42 indicator lamp illuminates when you: • turn the SmartKey to position 1 or 2 in the ignition lock • on vehicles with KEYLESS-GO, press the Start/Stop button once or twice The indicator ...

    Removing the ball coupling
    – Remove the spring cotter. – Remove the bolt from the ball coupling recess. – Remove the ball coupling from the ball coupling recess. – Clean the ball coupling if it is dirty. Information on ...