Activating/deactivating Lane Keeping Assist
You can use the Lane Keep. Asst. function to activate/deactivate Lane Keeping Assist or Active Lane Keeping Assist.
•► Press the
button on the
steering wheel to select the DriveAssist
menu.
•► Press the
button to select
Lane Keep. Asst..
•► Press
.
If the function is activated, the road markings are shown in red in the multifunction display.
•► To activate/deactivate: press
again.
If Lane Keeping Assist or Active Lane keeping
Assist is activated, the multifunction display
shows the
symbol when the ignition
is
switched on.
See also:
Important safety notes
When loading the vehicle, make sure that
you do not stack the load in the cargo
compartment higher than the lower edge of
the side windows. Do not place heavy
objects on top of the cargo ...
Deactivating the HOLD function
The HOLD function is deactivated automatically if:
• you accelerate and the transmission is in position D or R.
• you shift the transmission to position P.
• you apply the brakes again with a ...
Blind Spot Assist
Important safety notes
Blind Spot Assist uses a radar sensor system
to monitor the areas on both sides of your
vehicle. It supports you from speeds of
approximately 20 mph (30 km/h). A warning ...
