Activating/deactivating Blind Spot Assist
You can use the Blind Spot Asst. function to activate or deactivate Blind Spot Assist or Active Blind Spot Assist.
•► Press on the steering wheel to select the DriveAssist menu.
•► Press to select Blind Spot Asst..
•► Press .
If the function is activated, the monitored areas are shown in red in the multifunction display.
•► To activate/deactivate: press again
See also:
Deactivating/activating ESP®
WARNING
Under no circumstances should you
deactivate ESP® when the ESP®
warning lamp in the instrument cluster
flashes. Proceed as follows:
• when driving off, apply as little throttle as ...
Manual interior lighting control
- To switch the front interior lighting on:
set the rocker switch to the
position.
- To switch the front interior lighting off:
set the rocker switch to the
position.
- To switch the rear in ...
Resetting the rear sunblind
Door control panel in rear
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Pull switch 1 repeatedly until the rear
roller sunblind is fully closed.
Keep switch 1 pulled for ...