Trip computer "From start" or "From reset"

The values in the From Start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated from the last time the submenu was reset

•► Press the button on the or steering wheel to select the Trip menu. button on the steering wheel to select the Trip menu.

•► Press the button to select or From Start or From Reset. button to select

From Start or From Reset.

Trip computer "From start" (example)

Trip computer "From start" (example)

1. Distance
2. Time
3. Average speed
4. Average fuel consumption

The From Start trip computer is reset automatically if:

 - the ignition has been switched off for more than four hours.
 - 999 hours have been exceeded.
 - 9,999 miles have been exceeded.

When 9,999 hours or 99,999 miles have been exceeded, the trip computer is automatically reset From Reset.

    See also:

    Capacities
    ...

    Uploading/downloading data
    With this function, you can transfer COMAND data from one system (vehicle) to another system (vehicle). You can use either a USB stick or an SD card as temporary storage. You can only transfer ...

    Setting the B-pillar air vents
    1 B-pillar air vent 2 Thumbwheel for B-pillar air vent To open/close: turn thumbwheel 2 to the left or right. ...