Activating the rear view camera

•► Make sure that the SmartKey is in position 2 in the ignition lock.

•► Make sure that the "rear view camera" function is selected in COMAND (see the separate operating instructions for COMAND).

•► Engage reverse gear.

The area behind the vehicle is shown in the COMAND display.

    See also:

    Adaptive Highbeam Assist
    You can use this function to set the headlamps to change between low beam and high beam automatically. The system recognizes vehicles with their lights on, either approaching from the opposite ...

    Tire tread
    WARNING Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recomm ...

    Tire pressure monitor warning messages
    If the tire pressure monitor detects a significant pressure loss on one or more tires, a warning message is shown in the multifunction display. A warning tone also sounds and the tire pressure ...