Parking
WARNING
The Parking Guidance is only an aid and may
not detect all obstacles. The Parking
Guidance does not relieve you of the
responsibility to pay attention. You are always
responsible for safety and must continue to
pay attention to your immediate surroundings
when parking and maneuvering. Otherwise,
you could endanger yourself and others.
•► Stop the vehicle when the parking space symbol shows the desired parking space in the instrument cluster.
•► Shift the transmission to position R.
The following message appears in the multifunction display: Check vehicle surroundings Confirm with OK.
•► Press the
button on the
multifunction
steering wheel to confirm.
The multifunction display switches to Parking Guidance.
Depending on your distance from the parking space, the Please drive backwards message appears in the multifunction display.

•► If necessary, reverse towards the parking space. This is indicated by an arrow pointing backwards.
Continue backing up until you hear a tone.
Stop – the parking position has been reached. The arrow is white.
The Please steer to the right or Please steer to the left message appears in the multifunction display.

•► While the vehicle is stationary, turn the steering wheel in the specified direction until the arrow is white and a warning tone sounds.
•► To reverse into the parking space: maintain the steering wheel angle and reverse carefully.
•► Stop as soon as you hear a warning tone, The vehicle has reached the position in which you need to countersteer.
The Please steer to the left or Please steer to the right message appears in the multifunction display.
•► Countersteering: while the vehicle is stationary, turn the steering wheel in the specified direction until the arrow is white and a warning tone sounds.
•► To reverse into the parking space: maintain the steering wheel angle and reverse carefully.
•► Stop as soon as you hear a warning tone, at the latest when PARKTRONIC sounds the continuous warning tone.
The Parking Guidance finished message appears in the multifunction display and a warning tone sounds. You may be asked to steer in a different direction and then change gear. In this case, further displays in the multifunction display will direct you to the final position.
•► Maneuver if necessary.
•► Always observe the warning messages displayed by PARKTRONIC
See also:
Replacing the windshield wiper blades
Removing the wiper blades
•► Remove the SmartKey from the ignition
lock or turn it to position 0 (KEYLESS-GO).
•► Fold the wiper arm away from the
windshield until it engages.
•` ...
Warning and display messages in the
multifunction display
•► Activate ATTENTION ASSIST using the onboard
computer
Symbol 1 appears in the multifunction
display.
If ATTENTION ASSIST is active, you will be
warned no sooner than 20 minutes after ...
Starting procedure with the SmartKey
To start the engine using the SmartKey
instead of KEYLESS-GO, pull the Start/
Stop button out of the ignition lock.
•► To start a gasoline engine: turn the
SmartKey to position 3 in ...
