Activation conditions
You can activate the HOLD function if:
- the vehicle is stationary.
- the engine is running.
- the driver's door is closed or your seat belt
is fastened.
- the parking brake is not applied.
- the hood is closed.
- the transmission is in position D, R or N.
- DISTRONIC PLUS is deactivated.
See also:
Opening/closing automatically from the inside
WARNING
Maintain sight of the area around the rear of
the vehicle while operating the trunk lid with
the door mounted switch. Monitor the closing
procedure carefully to make sure no one is in ...
Brake fluid
WARNING
Over a period of time, the brake fluid absorbs
moisture from the air; this lowers its boiling
point.
If the boiling point of the brake fluid is too low,
vapor pockets may form in t ...
Checking tire pressure manually
To determine and set the correct tire
pressure, proceed as follows:
Remove the valve cap of the tire that is to
be checked.
Press the tire pressure gauge securely onto
the valve.
Read the ...