Vehicles with automatic transmission

•► Shift the transmission to position P.

Using the SmartKey

•► Turn the SmartKey to position 0 in the ignition lock and remove it.
The immobilizer is activated.
•► Apply the parking brake firmly.

If you turn off the engine with the SmartKey and then remove it from the ignition lock or open a front door, the automatic transmission shifts to P automatically.

Using KEYLESS-GO

•► Press the Start/Stop button.

The engine stops and all the indicator lamps in the instrument cluster go out.
•► Apply the parking brake firmly.

If you use the Start/Stop button to switch off the engine, the automatic transmission shifts to N automatically. If you then open the driver's or front-passenger door, the automatic transmission shifts to P.

In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds.

If you have started the engine with the Start/ Stop button and it cannot be switched off as described:

•► remove the Start/Stop button from the ignition lock.
•► insert the SmartKey into the ignition lock.

The engine switches off. The ignition is in position 0.

    See also:

    EBD (electronic brake forcedistribution)
    Observe the "Important safety notes" section. EBD monitors and controls the brake pressure on the rear wheels to improve driving stability while braking. WARNING   If EBD ...

    Snow chains
    For safety reasons, Mercedes-Benz recommends that you only use snow chains that have been specially approved for your vehicle by Mercedes-Benz, or are of a corresponding standard of quality. ...

    Storing the crosshair position in the list of previous destinations
    Route guidance not active A crosshair appears on the map if you have moved the map manually. You can store the crosshair position as a destination in the list of previous destinations. To sho ...