Transmission position and drive program display
The current transmission position and drive program appear in the multifunction display.
1. Transmission position display
2. Drive program display
The arrows in the transmission position display show how and into which transmission positions you can change using the DIRECT SELECT lever.
If the transmission position display in the multifunction display is not working, you should pull away carefully to check whether the desired transmission position is engaged. Ideally, you should select transmission position D and drive program E or S. Do not restrict the shift range.
See also:
GAWR (Gross Axle Weight Rating)
The GAWR is the maximum permissible axle
weight. The actual load on an axle must never
exceed the gross axle weight rating. The
gross axle weight rating can be found on the
vehicle identificat ...
Switching the button lighting on/off
Press button 2 on the remote control.
Depending on the previous status, the
button lighting is switched on or off.
If you do not use the remote control for
about 15 seconds, the button light ...
Removing the towing eye
Loosen the towing eye and unscrew it.
Attach cover 1 to the bumper and press
until it engages.
Place the towing eye in the vehicle tool kit. ...