Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the defrosting function until the windshield is clear again.
•► Turn the SmartKey to position 2 in the ignition lock.
•► To activate: press the
button.
The indicator lamp above the 
button
lights up.
The climate control system switches to the following functions:
- cooling with air dehumidification on
- high airflow
- high temperature
- air distribution to the windshield and
front side windows
- air-recirculation mode off
•► To switch off: press the
button.
The indicator lamp above the 
button
goes out. The previously selected settings
come into effect again. The cooling with air
dehumidification function remains on. Airrecirculation
mode remains deactivated.
or
•► Press the 
button.
The indicator lamp above the 
button
goes out. Airflow and air distribution are set
to automatic mode.
or
•► Automatic climate control: press temperature button 9 or 12 up or down.
Automatic climate control: press
temperature button 10 or 14 up or down.
or
•► Dual-zone automatic climate control:
press switch 11 up or down.
3-zone automatic climate control: press button 12 up or down
See also:
Cornering light function
The cornering light function improves the
illumination of the road over a wide angle in
the direction you are turning, enabling better
visibility in tight bends, for example. It can
only be ...
Useful information
This Operator's Manual describes all models and all standard and optional equipment
of your vehicle available at the time of publication of the Operator's Manual. Country-specific
diffe ...
Restoring the factory settings
Press the and
buttons simultaneously for approximately
six seconds until the battery check lamp flashes twice.
...