Switching the rear window wiper on/ off
Combination switch
1. 
Switch
2. 
To wipe with washer fluid
3. I To switch on intermittent wiping
4. 0 To switch off intermittent wiping
5. 
To wipe with washer fluid
•► Turn the SmartKey to position 1 or 2 in the ignition lock.
•► Turn switch 1 on the combination switch to the corresponding position.
When the rear window wiper is switched on, the icon appears in the instrument cluster.
See also:
Driving on wet roads
Hydroplaning
If water has accumulated to a certain depth
on the road surface, there is a danger of
hydroplaning occurring, even if:
• you drive at low speeds.
• the tires have adequate tread de ...
Making adjustments in 1 mph (Canada: 1 km/h) increments
Briefly press the cruise control
lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Recovering a vehicle that has become
stuck
Pull away smoothly, slowly, and in a
straight line when pulling out a vehicle that
has become stuck. Excessive tractive
power could damage the vehicles.
If the drive wheels have become stu ...