High-beam headlamps (halogen headlamps)/cornering lamps (Bi-Xenon headlamps)
•► Switch off the lights.
•► Open the hood.
•► Turn housing cover 1 counter-clockwise and pull it out.
•► Turn bulb holder 2 counter-clockwise and pull it out.
•► Take the bulb out of bulb holder 2;.
•► Insert the new bulb into bulb holder 2.
•► Insert bulb holder 2 into the lamp and turn it clockwise.
•► Align housing cover 1 and turn it clockwise until it engages.
See also:
Towing the vehicle with the rear axle
raised
Only possible on vehicles without
4MATIC.
When towing your vehicle with the rear axle
raised, it is important that you observe the
safety instructions
The ignition must be switched off if you ...
The bodywork: A first: frameless, all-aluminium doors
Intelligent lightweight construction plays a decisive role in bridging the
classic conflict of objectives between low weight and high strength in the new
CLS. The CLS is thus the first vehicle fro ...
Brake fluid level
If you notice that the brake fluid level in the brake fluid reservoir has fallen
to the MIN mark or less, check the brake system immediately for leaks. Also check
the thickness of the brake lin ...