Setting the exterior mirrors
This function is only available in vehicles for Canada.
If the battery has been disconnected or completely discharged, the exterior mirrors must be reset. The exterior mirrors will otherwise not fold in when you select the "Fold in mirrors when locking" function in the on-board computer.
•► Make sure that the SmartKey is in
position 1 in the ignition lock.
•► Briefly press button 1.
See also:
Speedometer with segments
The segments in the speedometer indicate
which speed range is available.
Cruise control activated:
The segments light up from the stored speed
to the maximum speed.
DISTRONIC PLUS activated:
O ...
Setting the temperature in the rear
compartment using the rear control
panel
Turn the SmartKey to position 2 in the
ignition lock.
To increase/reduce: press rocker
switch 12 or 17 up or down.
Only change the temperature setting in
small increments. Start at 72 °F (22 ...
Important safety notes
In order for the battery to achieve the
maximum possible service life, it must always
be sufficiently charged.
Have the battery checked regularly at a
qualified specialist workshop, such as an ...