Position of the steering wheel for driving
The steering wheel is moved to the last selected position when:
- the driver's door is closed.
- you insert the SmartKey into the ignition
lock.
or
- you press the Start/Stop button once on
vehicles with KEYLESS-GO.
When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position.
The last position of the steering wheel is stored after each manual setting or when you store the setting with the memory function
See also:
Front fog lamps
Only vehicles with front fog lamps have the
fog lamps function.
WARNING
If you suspect that driving conditions will be
foggy, turn the light switch to
before you
start your journey. O ...
Making adjustments in 5 mph (Canada: 10 km/h) increments
Briefly press the cruise control lever beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed. The last speed stored is increased or
reduced. ...
Storing the current speed or calling up
a stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from ...
