Switching on/off

The three red indicator lamps in the button indicate the heating level you have selected.

If the battery voltage is too low, the seat heating may switch off.

Driver's and front-passenger seat

Driver's and front-passenger seat

Rear seats

Rear seats

The system automatically switches down from level 3 to level 2 after about eight minutes (driver's seat and front-passenger seat) or five minutes (rear seats).

The system automatically switches down from level 2 to level 1 after approximately ten minutes.

The system automatically switches off approximately 20 minutes after it is set to level 1.

•► Make sure that the SmartKey is in position 2 in the ignition lock.

•► To switch on: press button 1 repeatedly until the desired heating level is set.

•► To switch off: press button 1 repeatedly until all the indicator lamps go out.

    See also:

    Closing the hood
    WARNING When closing the hood, use extreme caution not to catch hands or fingers. Be careful that you do not close the hood on anyone. Make sure the hood is securely engaged before driving of ...

    Cleaning the plastic trim
    WARNING When cleaning the steering wheel boss and dashboard, do not use cockpit sprays or cleaning agents containing solvents. Cleaning agents containing solvents cause the surface to becom ...

    DEF
    Important safety notes For BlueTEC vehicles only. DEF is a non-flammable, non-toxic, colorless, odorless and water-soluble fluid. Rinse surfaces that have come into contact with DEF immediately ...