Automatic locking feature
The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).
You could therefore be locked out when:
- the vehicle is being pushed.
- the vehicle is being towed.
- the vehicle is being tested on a dynamometer.
•► To deactivate: press and hold button 1 for about five seconds until a tone sounds.
•► To activate: press and hold button 2 for about five seconds until a tone sounds.
i If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.
You can also switch the automatic locking function on and off using the on-board computer
See also:
Seat belt
Display messages
Possible causes/consequences and
Solutions
After starting the engine, the red seat belt warning lamp lights up for
six seconds.
The seat belt war ...
Fuse box under the rear bench seat
– Fold the right-hand rear bench seat forward.
– To open: lift and fold back carpet 1 in the
direction of the arrow.
– Release clamps 2 by pressing them in the
direction of the arrow.
– Fol ...
Trailer power supply
The trailer socket of your vehicle is equipped at the factory with a permanent
power supply. The permanent power supply is supplied via trailer socket pin 4.
You can connect accessories with a m ...