Braking
If ABS intervenes when braking, you will feel a pulsing in the brake pedal.
•► If ABS intervenes: continue to depress the brake pedal with force until the braking situation is over.
•► To make a full brake application: depress the brake pedal with full force.
The pulsating brake pedal can be an indication of hazardous road conditions, and functions as a reminder to take extra care while driving.
WARNING
Do not pump the brake pedal. Use firm, steady
brake pedal pressure instead. Pumping the
brake pedal defeats the purpose of the ABS
and significantly reduces braking
effectiveness.
See also:
Clearing the memory of the integrated garage door opener on the rear-view mirror
X Turn the SmartKey to position 2 in the ignition lock.
X Press and hold transmitter buttons 2 and 4 for approximately 20 seconds until
indicator lamp 1 flashes rapidly. The memory is cleared.
...
Important safety notes
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the
components on the circuit and their functions
stop operating.
WARNING
Only use fuses approved b ...
Unlocking and opening doors from inside
You can open a door from inside the vehicle
even if it has been locked. You can only open
the rear doors from inside the vehicle if they
are not secured by the child-proof locks.
Only open the ...