Checking the oil level using the oil dipstick

Park the vehicle on a level
surface.
To check the oil level with the engine at
normal operating temperature, switch the
engine off and wait for approximately five
minutes.
Pull oil dipstick 1 out of the
dipstick guide
tube.
Wipe off oil dipstick 1.
Slowly slide oil dipstick 1 into
the guide
tube to the stop, and take it out again.
If the level is between MIN mark 3 and
MAX mark 2, the oil level is correct.
If the oil level has sunk to MIN
mark 3 or
below, add
0.55 to 1.1 US qt(0.5 to 1.0 liter) engine oil.
See also:
Slippery road surfaces
WARNING
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for that purpose.
Indicated temperatures just above the
freezin ...
Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing ro ...
Brow of hill
When driving up an uphill gradient, slightly reduce pressure on the accelerator
immediately before reaching the brow of the hill. Use the vehicle's own impetus
to drive over the top of the hil ...
