DISTRONIC PLUS displays in the multifunction display

General notes

You can select the distance display in the Assistance menu of the onboard computer.

Display when DISTRONIC PLUS is deactivated

function Select the Distance Display function using the on-board computer.

When DISTRONIC PLUS is deactivated, you will see the following in the multifunction display:

1 Symbol for activated PRE-SAFE® Brake

1 Symbol for activated PRE-SAFE® Brake
2 Vehicle in front, if detected
3 Distance indicator, current distance to the vehicle in front
4 Specified minimum distance to the vehicle in front; adjustable
5 Own vehicle

Display when DISTRONIC PLUS is activated

function Select the Distance Display function using the on-board computer.

You will see the stored speed for about five seconds when you activate DISTRONIC PLUS.

After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated:

1 DISTRONIC PLUS activated

1 DISTRONIC PLUS activated
2 Own vehicle
3 Specified minimum distance to the vehicle in front; adjustable
4 Vehicle in front, if detected

    See also:

    General notes
    USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must a ...

    Tread wear
    The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified U.S. government course. For example, a tire graded 150 would ...

    Setting the time/date format
    Select Vehicle in the main function bar by turning the COMAND controller and press to confirm. Select System by turning the COMAND controller and press to confirm. Select Time b ...