Vehicles with automatic transmission

Shift the transmission to position Apply the parking brake firmly.

P. Shift the transmission to position P.

Using the SmartKey

in the ignition lock and remove it. Turn the SmartKey to position 0 in the ignition lock and remove it.
The immobilizer is activated.

if the The SmartKey can only be removed if the transmission is in position P.

Using KEYLESS-GO

The engine stops and all the indicator Press the Start/Stop button.
The engine stops and all the indicator lamps in the instrument cluster go out.

closed, this When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".

If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.

    See also:

    Activating RACE START
    •► Depress the brake pedal with your left foot, and keep it depressed. •► Turn the drive program selector clockwise until the RS lamp lights up. The multifunction display shows the RAC ...

    Driving with summer tires
    At temperatures below 45 °F (+7 °C), the elasticity of summer tires and therefore also traction and braking capability are reduced considerably — equip your vehicle with M+S tires. Using summer ti ...

    LATCH-type (ISOFIX) child seat anchors in the rear
    WARNING Children that are too large for a child restraint must travel in seats using normal seat belts. Position shoulder belt across the chest and shoulder, not face or neck. In order to att ...