Notes on using dual-zone automatic climate control

The following contains notes and recommendations on optimum use of dualzone automatic climate control.

• Activate climate control using the buttons. The indicator lamps in the and and buttons. The indicator lamps in the buttons light up. and • Set the temperature to 72 °F (22 °C). buttons light up.
• Set the temperature to 72 °F (22 °C).
• Only use the "defrosting" function briefly until the windshield is clear again.
• Only use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel. The windows could otherwise fog up as, in air-recirculation mode, no fresh air is drawn into the vehicle.
• Use the ZONE function to adopt the temperature settings on the driver's side for the front-passenger side as well. The indicator lamp in the out. button goes out.

    See also:

    Vehicle identification plate
    Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on ...

    Problems with the seat ventilation
    The seat ventilation has switched off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. - Switch ...

    Low-beam headlamps
    - To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. - Turn the light switch to . The indicator lamp in the instrument cluster lig ...