Switching the rear window wiper on/off

Combination switch
Combination switch

1 2 To wipe with washer fluid Switch
2 3 To switch on intermittent To wipe with washer fluid
3 wiping To switch on intermittent wiping
4 wiping To switch off intermittent wiping
5 Turn the SmartKey to position To wipe with washer fluid

1 or 2 in the ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
switch Turn switch 1 on the combination switch to the corresponding position.
When the rear window wiper is switched on, the icon appears in the instrument cluster.

    See also:

    Checking the coolant level
    Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. – Turn the SmartKey to position 2 (Y page 139) in the ignition lock. On vehicles with KEYLES ...

    Coupling up a trailer
    WARNING   While you are coupling or decoupling a trailer, make sure nobody locks or unlocks the vehicle and/or opens or closes doors or the tailgate. The vehicle's level could change an ...

    Removing the ball coupling
    – Remove the spring cotter. – Remove the bolt from the ball coupling recess. – Remove the ball coupling from the ball coupling recess. – Clean the ball coupling if it is dirty. Information on ...