High-beam headlamps (halogen headlamps)
High-beam headlamps (halogen headlamps)
Switch off the lights.
Open the hood.
Turn housing cover 1
counter-clockwise and pull it out.
Turn bulb holder 2
counter-clockwise and pull it out.
Take the bulb out of bulb holder
2.
Insert the new bulb into bulb
holder 2.
Insert bulb holder 2 into the lamp
and turn it clockwise.
Align housing cover 1 and turn it
clockwise until it engages.
See also:
Tire pressure of 180 kPa (1.8 bar/
26 psi) is reached
– Switch off the tire inflation compressor.
– Unscrew the filler hose from the valve of
the faulty tire.
After use, excess TIREFIT may run out of
the filler hose. This could cause stains.
...
Direction of rotation
Tires with a specified direction of rotation
have additional benefits, e.g. if there is a risk
of hydroplaning. You will only gain these
benefits if the correct direction of rotation is
mainta ...
General notes
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. this device must a ...