High-beam headlamps

headlamps: turn the SmartKey in the ignition lock to position 2 or start To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
or Turn the light switch to or or . or Press the combination switch beyond.
the pressure point in the direction of arrow 1. Press the combination switch beyond the pressure point in the direction of arrow 1.
In the position, the highbeam headlamps or are only switched on when it is dark and the engine is running. position, the highbeam headlamps are only switched on when it is dark and the engine is running.
The instrument cluster lights up when the high-beam headlamps are switched on. indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on.
headlamps: move the combination switch back to its normal position. To switch off the high-beam headlamps: move the combination switch back to its normal position.
The instrument cluster goes out. indicator lamp in the instrument cluster goes out.

    See also:

    Safety guidelines for seat belts, Emergency Tensioning Devices (ETDs) and air bags
    WARNING • Damaged seat belts or seat belts that have been subjected to stress in an accident must be replaced. Their anchoring points must also be checked. Only use seat belts installed or ...

    Trip computer "From start" or "From reset"
    The values in the From start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated from the last time the submenu was reset (). Press th ...

    Removing the mechanical key
    Push release catch 1 in the direction of the arrow and at the same time, remove mechanical key 2 from the SmartKey. ...