Preparing the vehicle
WARNING
The wheel and tire size of the emergency
spare wheel/spare wheel may differ to that of
the damaged wheel. When using an
emergency spare wheel/spare wheel the
handling characteristics of the vehicle may
change.
Adapt your style of driving accordingly.
Never operate the vehicle with more than one
emergency spare wheel/spare wheel that
differs in size.
Only use an emergency spare wheel/spare
wheel of a differing size briefly and do not
switch off ESP®.
When using an emergency spare wheel, you
must not exceed the maximum speed of
50 mph (80 km/h).
WARNING
Have the emergency spare wheel/spare
wheel replaced with a new wheel as soon as
possible at a qualified specialist workshop
which has the necessary specialist knowledge
and tools to carry out the work required.
Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop.
Vehicles without a spare wheel/emergency spare wheel are not equipped
with a tire-change tool kit at the factory. For
more information on which tools are
required to perform a wheel change on your
vehicle, e.g. wheel chock, lug wrench or
alignment bolt, consult an authorized
Mercedes-Benz Center.
– Prepare the vehicle as described.
– If a trailer is coupled to the vehicle,
uncouple it.
– Remove the following items (depending on
the vehicle's equipment) from the stowage
well under the trunk floor:
- the emergency spare wheel
- the lug wrench
- the folding wheel chock
- the jack
- the ratchet wrench
- the alignment bolt
– Secure the vehicle to prevent it from rolling
away.
See also:
Manual interior lighting control
To switch the front interior lighting on/ off: press the
button.
To switch the rear interior lighting on/ off: press the
button.
To switch the reading lamps on/off: press the
button.
...
Switching the display design
Select Settings using the
button
and confirm with the button.
Select Day Mode, Night Mode or
Automatic using the buttons
and press the button to confirm.
The icon indicates the curren ...
Function restrictions
For safety reasons, some COMAND functions
are restricted or unavailable while the vehicle
is in motion. You will notice this, for example,
because you will either not be able to select
certain ...
