Engaging park position P automatically

Park position P is automatically engaged if:
- you switch off the engine using the SmartKey and remove the SmartKey, or if you switch off the engine using the Start/Stop button and open one of the front doors.
- the HOLD function (Y page 179) or DISTRONIC PLUS (Y page 169) brakes your vehicle until it is stationary and at least one of the following conditions is fulfilled:
    - there is a system malfunction.
    - there is a severe uphill or downhill slope.
The electric parking brake is then also applied.

    See also:

    Correct driver's seat position
    Observe the safety guidelines on seat adjustment •► Check whether you have adjusted seat = properly. Electrical seat adjustment (Y page 100) When adjusting the seat, make sure:   ...

    THERMOTRONIC climate control with three individual climate modes
    The second-generation Mercedes CLS can be optionally fitted with an automatic climate control system which not only allows individual temperatures to be set for three zones - for the driver, the f ...

    Locking and unlocking centrally
    The SmartKey centrally locks/unlocks: • the doors • the trunk lid • the fuel filler flap 1 Locks the vehicle 2 Unlocks the trunk lid 3 Unlocks the vehicle When unlocking, the tur ...