Opening and closing
Overhead control panel
1 To raise
2 To open
3 To close/lower
The panorama roof with power tilt/sliding
panel can only be operated when the roller
sunblind is open.
- Turn the SmartKey to position 1 or 2 in the
ignition lock.
- Push or pull the
switch in the
corresponding direction.
If you press the
switch beyond the
point of resistance, an automatic opening/closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
When raising the roof, automatic operation
is only available if the sliding sunroof is in
the closed position.
See also:
Resetting the panorama roof with
power tilt/sliding panel and the roller
sunblinds
Reset the panorama roof with power tilt/
sliding panel and the roller sunblinds if the
panorama roof with power tilt/sliding panel
or the roller sunblinds do not move smoothly.
•► Turn th ...
Activating/deactivating the radar
sensor system
The following systems are switched off when
the radar sensor system is deactivated:
• DISTRONIC PLUS
• BAS PLUS
• PRE-SAFE® Brake
• Blind Spot Assist
• Active Blind Spot Assist
USA on ...
Position of the steering wheel for driving
The steering wheel is moved to the last selected position when:
the driver's door is closed.
you insert the SmartKey into the ignition lock.
or
you press the Start/Stop button once on ve ...