Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
- To change the setting: press and hold
down the 
and
buttons
simultaneously for approximately six
seconds until the battery check lamp
flashes twice.
If the setting of the locking
system is
changed within the signal range of the
vehicle, pressing the or
button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
- To unlock the driver's door: press the
button once.
- To unlock centrally: press the
button twice.
- To lock centrally: press the
button.
The KEYLESS-GO function is changed as
follows:
- To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
- To unlock centrally: touch the inner
surface of the door handle on the frontpassenger
door or the rear door.
- To lock centrally: touch the outer sensor
surface on one of the door handles.
See also:
Problems with the side windows
Problem: a side window cannot be closed
because it is blocked by objects, e.g.
leaves in the window guide.
•► Remove the objects.•► Close the side window.
Problem: a side window canno ...
Automatic interior lighting control
To switch on/off: press
the button.
When the automatic interior lighting
control is activated, the button is flush with
the overhead control panel.
The interior lighting automatically switch ...
Driving
My biggest issue was with the E350's stiff accelerator pedal. I did most of
my driving on icy roads, and that's not where you want to be abrupt with the gas
pedal. Thing is, the pedal was so stiff ...