Releasing seat belts

guide belt tongue 2 back towards belt Press release button 4 and guide belt tongue 2 back towards belt sash guide 1.

fully rolled Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped in the door or in the seat mechanism. This could damage the door, the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill their protective function and must be replaced. Consult an authorized Mercedes-Benz Center.

    See also:

    Important safety notes
    The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating. WARNING Only use fuses approved by Merced ...

    Driving with summer tires
    At temperatures below 45 °F (+7 °C), the elasticity of summer tires and therefore also traction and braking capability are reduced considerably — equip your vehicle with M+S tires. Using summe ...

    Cleaning the trailer tow hitch
    The ball coupling must be cleaned if it becomes dirty or corroded. Remove rust on the ball of the ball coupling, e.g. with a wire brush. Remove dirt with a clean, lint-free cloth or a brush. A ...