Position of the steering wheel fordriving

The steering wheel is moved to the last selected position when:

• the driver's door is closed.
• you insert the SmartKey into the ignition lock.
or
• you press the Start/Stop button once on vehicles with KEYLESS-GO.

When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position.

The last position of the steering wheel is stored when you switch off the ignition or when you store the setting with the memory function.

    See also:

    Important safety notes
    The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating. WARNING Only use fuses approved by Merced ...

    Sets the specified minimum distance
    You can set the specified minimum distance for DISTRONIC PLUS by varying the time span between one and two seconds. With this function, you can set the minimum distance that DISTRONIC PLUS kee ...

    Opening and closing
    You can continue to operate the sliding sunroof after switching off the engine or removing the SmartKey from the ignition lock. This function is available for up to five minutes or until the d ...