Seat belt adjustment
The seat-belt adjustment function adjusts the driver's and front-passenger seat belt to the upper body of the occupants.
The belt strap is tightened slightly when:
• you engage the belt tongue in the belt
buckle and you then turn the SmartKey to
position 2 in the ignition lock.
• the SmartKey is in position 2 in the
ignition
lock and you then engage the belt tongue
in the buckle.
The seat-belt adjustment will apply a retraction force if any slack is detected between the occupant and the seat belt. Do not hold on to the seat belt tightly while it is adjusting. You can switch the seat-belt adjustment on and off in the on-board computer.
The seat-belt adjustment is an integral part of the PRE-SAFE® convenience function. More information about PRE-SAFE® can be found in the "PRE-SAFE® (preventative occupant protection)" section.
See also:
Deactivating the HOLD function
The HOLD function is deactivated
automatically if:
- you accelerate and the transmission is in position D or R.
- the transmission is in position P.
- you apply the brakes again with a certain am ...
Driving safety systems overview
In this section, you will find information about the following driving safety
systems:
• ABS (Anti-lock Braking System)
• BAS (Brake Assist System)
• BAS PLUS (Brake Assist System Plus*)
...
Unlocking and opening doors from
the inside
You can open a door from inside the vehicle
even if it has been locked. You can only open
the rear doors from inside the vehicle if they
are not secured by the child-proof locks.
Only open the ...