Safety notes

WARNING Work improperly carried out on electronic 
Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle's electronic components are interconnected, any modifications made may produce an undesired effect on other systems. Electronic malfunctions could seriously impair the operating safety of your vehicle.
Contact an authorized Mercedes-Benz Center for repairs or modifications to electronic components.
Other improper work or modifications on the vehicle could also have a negative impact on the operating safety of the vehicle.
Some safety systems only function when the engine is running. You should therefore never turn off the engine while driving.

WARNING Heavy blows against the vehicle underbody or 
Heavy blows against the vehicle underbody or tires/wheels may cause serious damage and impair the operating safety of your vehicle.
Such blows can be caused, for example, by running over an obstacle, road debris or a pothole.
If you feel a sudden significant vibration or ride disturbance, or you suspect that damage to your vehicle has occurred:
turn on your hazard warning flashers.
slow down carefully.
drive with caution to an area which is a safe distance from the road.
Inspect the vehicle underbody and tires/ wheels for possible damage. If the vehicle appears unsafe, have it towed to the nearest authorized Mercedes-Benz Center or other qualified maintenance or repair facility for further inspection or repairs.

    See also:

    Activating/deactivating the MONOfunction
    The MONO function is only available with automatic climate control.18 You can use the MONO function to adopt the settings configured for temperature, air distribution and airflow on the driver's s ...

    Precise wheel location: the front axle with McPherson struts
    At the front axle a three-link construction with McPherson struts is used. The lower link level consists of two separate elements which act as torque and cross struts and which are both forged fro ...

    Shifting to transmission position D
    - When the vehicle is stationary, depress the brake pedal. - Push the DIRECT SELECT lever down past the first point of resistance. ...