Towing the vehicle with the rear axle raised
Only possible on vehicles without 4MATIC.
When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions ().
The ignition must be switched off if you are towing the vehicle with the rear
axle raised. Intervention by ESP® could otherwise damage the brake system.
- Switch on the hazard warning lamps ().
- Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock.
- When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you.
See also:
Lowering the vehicle
WARNING
Pump up the collapsible spare wheel before lowering the vehicle. You could otherwise
damage the wheel rim.
Place the ratchet wrench onto the hexagon nut of the jack so that the
...
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
- an air bag is deployed.
- the vehicle is slowed down severely from a
speed of over 45 mph(70 km/h) and comes
to a halt.
- To switch on ...
GVW (Gross Vehicle Weight)
The gross vehicle weight comprises the
weight of the vehicle including fuel, tools, the
spare wheel, accessories installed,
occupants, luggage and the drawbar
noseweight, if applicable. The gr ...