Installing the towing eye
Vehicles with a trailer tow hitch: if possible, secure the towing device on the trailer tow hitch ().
X Remove the towing eye from the vehicle tool kit ().
WARNING
The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Vehicles without the AMG Sports package
Vehicles with the AMG Sports package
- Press the mark on cover 1 inwards in the direction of the arrow. Rear bumper on vehicles with AMG Sports package: pry cover 1 out of the bumper by inserting a blunt, flat object into the recess.
- Take cover 1 off the opening.
- Screw the towing eye in clockwise to the stop and tighten it.
See also:
Load bearing index
The load bearing index (also load index) is a
code that contains the maximum load bearing
capacity of a tire. ...
Engine number
1 Emission control information plate,
including the certification of both federal
and Californian emissions standards
2 Engine number (stamped into the
crankcase)
3 VIN (on the lower edge of th ...
Points to observe before use
The sockets can be used for accessories, e.g.
lamps or mobile phone chargers with a
maximum current draw of 180 W (15 A).
If you use the sockets for long periods when
the engine is switched off, ...