Cleaning the display
- Before cleaning the display, make sure that it is switched off and has cooled down.
- Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner.
- Dry the display surface using a dry microfiber cloth.
For cleaning, do not use any of the following:
- alcohol-based thinner or gasoline
- abrasive cleaning agents
- commercially-available household cleaning agents
These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.
See also:
Switching the ECO function on/off
The ECO start/stop function switches the
engine off automatically if the vehicle is
stopped under certain conditions. When
pulling away again, the engine starts
automatically. You can switch
...
Setting the center air vents
1 Center air vent, left
2 Center air vent, right
3 Center vent thumbwheel, right
4 Center vent thumbwheel, left
► To open/close: turn thumbwheels 3 and 4
to the right or left. ...
Problems with fuel and the fuel tank
Problem
Possible causes/consequences and
Solutions
Fuel is leaking from the vehicle.
Risk of explosion or fireThe fuel line or the fuel tank is
defective.
Turn the ...