Cleaning the wiper blades

WARNING WARNING

Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you.

you will damage the hood. Only fold the windshield wipers away from the windshield when vertical. Otherwise, you will damage the hood.

Do not pull the wiper blade. Otherwise, the wiper blade could be damaged.

the graphite coating could be damaged. This could cause wiper noise. Do not clean wiper blades too often and do not rub them too hard. Otherwise, the graphite coating could be damaged. This could cause wiper noise.

  • Fold the wiper arms away from the windshield.
  • Carefully clean the wiper blades with a damp cloth.
  • Fold the windshield wipers back again before switching on the ignition.

if the wiper arm smacks against it suddenly. Hold the wiper arm securely when folding back. The windshield could be damaged if the wiper arm smacks against it suddenly.

    See also:

    Turn signal lamps/side marker lamps
    ► Switch off the lights. ► Open the hood. ► Turn bulb holder 1 (WY 5 W)/2 (3457A) counter-clockwise and pull it out. ► Remove the bulb from bulb holder 1/2. ► Inse ...

    Headlamp cleaning system
    The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running. ...

    Downloading destinations in COMAND
    The components and operating principles of COMAND can be found on. You can only use the Destination Download function if the vehicle is equipped with a navigation system. Destination Downloa ...