Automatic car wash

WARNING WARNING

Braking efficiency is reduced after washing the vehicle. This could cause an accident. For this reason, you must drive particularly carefully after washing the vehicle until the brakes have dried.

You can wash the vehicle in an automatic car wash from the very start.

cleaning agents. These cleaning agents can damage the paintwork or plastic parts. Never clean your vehicle in a Touchless Automatic Car Wash as these use special cleaning agents. These cleaning agents can damage the paintwork or plastic parts.

If the vehicle is very dirty, pre-wash it before cleaning it in an automatic car wash.

vehicle in a tow-through car wash. The vehicle could be damaged if the transmission Make sure that the automatic transmission is in position N when washing your vehicle in a tow-through car wash. The vehicle could be damaged if the transmission is in another position.

Make sure that:

  • the side windows and the sliding sunroof are fully closed.
  • the ventilation/heating is switched off (the OFF button has been pressed).
  • the windshield wiper switch is in position 0.

Otherwise, the vehicle might be damaged.

After using an automatic car wash, wipe off wax from the windshield and the wiper blades. This will prevent smears and reduce wiping noises caused by residue on the windshield.

    See also:

    Switching the rear-compartment climate control on/off using the rear control panel
    Turn the SmartKey to position 2 in the ignition lock. To switch on: press rocker switch 15 up or down and select AUTO. or Press rocker switch 15 up or down and select MAN. To switch of ...

    Transmission positions
    Park position Do not shift the transmission into position P unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parki ...

    Call priority
    When service calls are active, e.g. Roadside Assistance or MB Info calls, an emergency call can still be initiated. In this case, an emergency call will take priority and override all other active ...