Floormat on the driver's side
WARNING
Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened.
The floormat should always be securely fastened using the fastening equipment.
Before driving off, check that the floormat is securely in place and adjust it if necessary. A loose floormat could slip and hinder proper functioning of the pedals.
Do not place several floormats on top of each other as this may impair pedal movement.
- Slide the seat backwards.
- To install: place the floormat in the footwell.
- Press studs 1 onto retainers 2.
- To remove: pull the floormat off retainers 2.
- Remove the floormat.
See also:
Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be obstructing the windshield wiper movement.
The wiper motor has been deactivated.
For safety reasons, you should remove t ...
Low-beam headlamps (halogen
headlamps)
- Remove the cover in the front wheel arch.
- Turn housing cover 1 counter-clockwise
and pull it out.
- Turn bulb holder 2 counter-clockwise and
pull it out.
- Take the bulb out of bulb holde ...
Conditions for activation
RACE START can be activated when:
• the doors are closed.
• the engine is running and it has reached an
operating temperature of approximately
176 °F (80 °C). This is the case when the
engine ...