Important safety notes

that your system is activated and ready for use, and press the A license agreement must exist in order to activate the mbrace service. Ensure that your system is activated and ready for use, and press the any of the steps mentioned is not carried out, the system may not be activated. MB Info call button to register. If any of the steps mentioned is not carried out, the system may not be activated.

If you have questions about the activation, contact one of the following telephone assistance services:

USA: Mercedes-Benz Customer
Assistance Center under
1-800-FOR-MERCedes
(1-800-367-6372) or 1-888-990-9007

Canada: Customer Service at
1-888-923-8367

Shortly after successfully registering with the mbrace service, a user ID and password will be sent to you by post. You can use this password to log in to the mbrace section under "Owners Online" at http:// www.mbusa.com.

The mbrace system is available if:

  • it has been activated and is operational.
  • the corresponding mobile phone network is available for transmitting data to the Customer Center.
  • a service subscription is available.
  • the starter battery is sufficiently charged.

is sufficient GPS reception and the vehicle position can be forwarded to the Customer Determining the location of the vehicle on a map is only possible if there is sufficient GPS reception and the vehicle position can be forwarded to the Customer Center.

    See also:

    Checking the oil level using the oil dipstick
    Park the vehicle on a level surface. To check the oil level with the engine at normal operating temperature, switch the engine off and wait for approximately five minutes. Pull oil dipst ...

    Collision warning
    If a vehicle is detected in the monitoring range of Blind Spot Assist and you switch on the turn signal, a double warning tone sounds. Red warning lamp 1 flashes. If the turn signal remains on, de ...

    Important notes on tire pressure
    WARNING Should the tire pressure drop repeatedly: • check the tire for foreign bodies. • check whether the wheel is losing air or the valve is leaking. • make sure that only a valve cap approved ...