Installing/removing the cargo compartment cover

  • To remove: make sure that cargo compartment cover 1 is rolled up.
  • Press handle 2 on the right underside to the left.
  • Remove cargo compartment cover 1.
  • To install: attach cargo compartment cover 1 to the opening on the left-hand side.
  • Press handle 2 to the right.
  • Allow cargo compartment cover 1 to engage in the appropriate recess.
    See also:

    ATA (Anti-Theft Alarm system)
    A visual and audible alarm is triggered if the alarm system is armed and you open: • a door • the vehicle with the mechanical key • the trunk lid • the hood The alarm is not switched off, even ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Resetting the rear sunblind
    Door control panel in rear Turn the SmartKey to position 1 or 2 in the ignition lock. Pull switch 1 repeatedly until the rear roller sunblind is fully closed. Keep switch 1 pulled for ...