Folding the rear seat backrest back
- : Backrest
- ; Lock verification indicator
- = Backrest release handle
- Move the driver's or front-passenger seat forward if necessary.
Make sure that the seat belt does not become trapped when folding the rear seat backrest back. Otherwise, it could be damaged.
- Fold seat backrest 1 back until it engages. Red lock status indicator 2 is no longer visible.
WARNING
If a red indicator is visible with the seat backrest up, then the seat backrest is not properly locked into position.
Always lock seat backrest in its upright position when rear seat bench is occupied, or the expanded cargo volume is not in use. Check for secure locking by pushing and pulling on the seat backrest.
In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle.
To help avoid personal injury during a collision or sudden maneuver, exercise care when transporting cargo.
- Adjust the head restraints if necessary ().
- Move the driver's or front-passenger seat back if necessary.
See also:
Tire pressure of cold tires
The tires are cold:
• if the vehicle has been parked without
direct sunlight on the tires for at least three
hours and
• if the vehicle has not been driven more than
1 mile (1.6 km). ...
Important safety notes
WARNING
When towing a trailer, incorrect equipment
and driving style could cause you to lose
control of the vehicle.
Towing incorrectly or not observing this
Operator's Manual could lead to d ...
Operating the rear roller sunblind
Operating from the front
WARNING
When opening or closing the rear roller
sunblind, make sure no one is in danger of
being injured by the opening or closing
procedure.
The rear roller sunb ...