Overview
The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock.
You can control the multifunction display and the settings in the on-board computer using the buttons on the multifunction steering wheel.
- Multifunction display
- ight control panel
- To switch on the Voice Control System; see the separate operating instructions
- Back button
- Left control panel
See also:
Removing/attaching the washer fluid reservoir
You must remove the washer fluid reservoir from the engine compartment before
you can replace the bulbs in the left-hand headlamp.
To detach: turn catch 2 counterclockwise.
Swing washer flui ...
Brow of hill
When driving up an uphill gradient, slightly
reduce pressure on the accelerator
immediately before reaching the brow of the
hill. Use the vehicle's own impetus to drive
over the top of the hil ...
Problems with the cooling with air
dehumidification function
When you press the button, the
indicator lamp in the button flashes three
times or remains off. You can no longer switch
on the cooling with air dehumidification
function.
- Consult a qualif ...