Decoupling a trailer
WARNING
Do not disconnect a trailer with an engaged overrun brake. Otherwise, your hand could become trapped between the bumper and trailer drawbar.
Do not disconnect a trailer with an engaged overrun brake. Otherwise, your
vehicle could be damaged by the rebounding of the overrun brake.
- Make sure that the automatic transmission is set to position P.
- Apply the vehicle's parking brake.
- Close all doors and the tailgate.
- Apply the trailer's parking brake.
- Remove the trailer cable and decouple the trailer.
See also:
Jump-starting
WARNING
Failure to follow these directions will cause damage to the electronic
components, and can lead
to a battery explosion and severe injury or death.
Never lean over batteries while con ...
High-beam flasher
•► To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
•► Pull the combination switch in the direction
of arrow 3. ...
Hiding/showing the navigation menu
To show: turn
or slide
the
COMAND controller.
This function is not available while the
DVD's own menu is being
displayed.
To hide: slide the
COMAND
controller.
or
Wait for appro ...
