Slippery road surfaces

WARNING WARNING

The outside temperature indicator is not designed to serve as an ice-warning device and is therefore unsuitable for that purpose.

Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may still be icy, especially in wooded areas or on bridges.

WARNING WARNING

On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not prevent this type of loss of control.

Drive particularly carefully on slippery road surfaces. Avoid sudden acceleration, steering and braking maneuvers. Do not use cruise control.

If the vehicle threatens to skid or cannot be stopped when moving at low speed:

  • Shift the transmission to position N.

For more information on driving with snow chains, see ().

WARNING WARNING

Make sure that you do not endanger other road users when you apply the brakes.

    See also:

    Lowering the vehicle
    Turn the crank of the jack counterclockwise until the vehicle is once again standing firmly on the ground. Place the jack to one side. Tighten the wheel bolts evenly in a crosswise patt ...

    Changing the set speed
    When DSR is activated, the set speed can be changed to a value between 1 mph and 10 mph (Canada: between 2 km/h and 18 km/h) during the journey. – To increase or decrease the set speed in 1 ...

    Opening and closing the side trimpanels
    You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel ► To open: turn release knob 1 90° in the direction ...