Transmission positions

Do not shift the transmission into position P() unless the vehiclePark position

Do not shift the transmission into position P() unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parking lock, you must always apply the parking brake to secure the vehicle. The SmartKey can only be removed if the transmission is in position P. If the SmartKey is removed from the ignition lock, the selector lever is locked.

If the vehicle electronics are malfunctioning, the selector lever may be locked in position P. To release the selector lever lock, see "Releasing the parking lock manually" ().

Only shift the transmission to R when the vehicle is stationary.Reverse gear

Only shift the transmission to R when the vehicle is stationary.

Do not shift the transmission to N while driving. The transmission could otherwiseNeutral

Do not shift the transmission to N while driving. The transmission could otherwise be damaged.

No power is transmitted from the engine to the drive wheels. Releasing the brakes will allow you to move the vehicle freely, e.g. to push it or tow it.

If ESP® is deactivated or faulty: only shift the transmission to position N if the vehicle is in danger of skidding, e.g. on icy roads.

Drive Rolling in neutral N can damage the drive train.

The automatic transmission changes gear automatically. All forward gears areDrive

The automatic transmission changes gear automatically. All forward gears are available.

    See also:

    Selecting a film/title
    Note Further information on this function is available in the "Video" section. Option 1 Press the button on the remote control and show the menu. Select Video DVD and press the ...

    Switching the button lighting on/off
    Press button 2 on the remote control. Depending on the previous status, the button lighting is switched on or off. If you do not use the remote control for about 15 seconds, the button light ...

    Opening and closing
    Overhead control panel To open To open To close Turn the SmartKey to position 1 or 2 in the ignition lock. Press or pull the switch in the corresponding direction. If you press ...