Activating/deactivating
- Turn the SmartKey to position 2 in the ignition lock.
- To switch on: press the
button.
The indicator lamp in the button
lights up. Airflow and air distribution are set to automatic mode.
or
- Press the
button. The indicator
lamp in the button goes out. The
previously selected settings come into effect again. - To switch off: press the
button. The indicator lamp in the
button lights up.
See also:
Hill start assist
Hill start assist helps you when pulling away forwards or in reverse on an uphill
gradient. It holds the vehicle for a short time after you have removed your foot
from the brake pedal. This gives ...
Important safety notes
Consult an authorized Mercedes-Benz Center
if you require information on approved and
recommended tires and wheels for summer
and winter operation. Advice on purchasing
and caring for tires is ...
Checking the oil level using the oil dipstick
Park the vehicle on a level surface. To check the oil level with the engine
at operating temperature, switch the engine off and wait for approximately five
minutes.
Pull oil dipstick 1 ou ...