Replacing the rear window wiper blade

Removing the wiper blade

  • Remove the SmartKey from the ignition lock.
  • Fold wiper arm 1 away from the rear window until it engages.
  • Position wiper blade 2 at a right angle to wiper arm 1.
  • Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
  • Remove wiper blade 2.

Installing the wiper blade

  • Place new wiper blade 2 onto wiper arm 1.
  • Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
  • Make sure that wiper blade 2 is seated correctly.
  • Position wiper blade 2 parallel to wiper arm 1.
  • Fold wiper arm 1 back onto the rear window.
    See also:

    Notes on driving
    • If the vehicle is heavily laden, check the tire pressures and correct them if necessary. • When parking your vehicle, make sure that the tires do not get deformed by the curb or other obstacle ...

    Activating/deactivating DSR
    Activating You can only activate DSR if you are driving at 25 mph (40 km/h) or slower. – Press button 1. Indicator lamp 2 lights up. The following messages appear in the multifunction displa ...

    Important safety notes
    The EASY-ENTRY/EXIT feature makes getting in and out of your vehicle easier. You can activate and deactivate the EASYENTRY/ EXIT feature in the on-board computer. WARNING You must make sure ...