Calling up a stored parking position setting

  • Turn the SmartKey to position 2 in the ignition lock.
  • Adjust the exterior mirror on the frontpassenger side with the corresponding button ().
  • Engage reverse gear. The exterior mirror on the front-passenger side moves to the stored parking position.

The exterior mirror on the front-passenger side moves back to its original position:

  • as soon as you exceed a speed of 6 mph (10 km/h)
  • about ten seconds after you have disengaged reverse gear
  • if you press button 1 for the exterior mirror on the driver's side
    See also:

    SPLITVIEW
    SPLITVIEW allows you to simultaneously use different COMAND functions on the frontpassenger side and on the driver's side. Depending on the viewing angle of the display (from the driver's seat ...

    General notes
    WARNING All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes ...

    Limited braking performance on salttreated roads
    WARNING The layer of salt on the brake discs and the brake pads/linings may cause a delay in the braking effect, resulting in a significantly longer braking distance, which could lead to an ...