Problems with the sliding sunroof
In the following section, the term "sliding sunroof" refers to the panorama roof with power tilt/sliding panel.
Problem: the sunroof cannot be closed and you cannot see the cause.
WARNING
You could be severely or even fatally injured when closing the sliding sunroof with increased closing force or if the antientrapment feature is deactivated. Make sure that nobody can become trapped when closing the sliding sunroof.
If the sliding sunroof is obstructed during closing and reopens again slightly:
- Immediately after the sliding sunroof blocks, pull the
switch in the overhead control
panel down to the point of resistance and hold it until the sliding sunroof
is closed. The sliding sunroof is closed with increased force.
If the sliding sunroof is obstructed again during closing and reopens again slightly:
- Immediately after the sliding sunroof blocks, pull the
switch in the overhead control
panel down to the point of resistance and hold it until the sliding sunroof
is closed.
The sliding sunroof is closed without the anti-entrapment feature.
WARNING
Pressing and holding the sliding sunroof switch to close the sliding sunroof immediately after it had been blocked two times will cause the sliding sunroof to close without the anti-entrapment feature for as long as you hold the switch.
If the sliding sunroof still cannot be opened or closed as a result of a malfunction,
contact a qualified specialist workshop.
See also:
Number of seats
The specifications shown on the Tire and Loading Information placard in the
illustration are examples. The number of seats is vehicle-specific and can differ
from the details shown. The number ...
Opening and closing
Overhead control panel
1. To raise
2. To open
3. To close/lower
The panorama roof with power tilt/sliding
panel can only be operated when the roller
sunblind is open.
•► Turn th ...
Calling up a stored setting
► Press and hold the relevant storage
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
The setting procedure is interrupted as
soon ...
